View STF15NM60ND_4637085.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STB15NM60ND - STF/I15NM60ND STP15NM60ND - STW15NM60ND
N-channel 600 V - 0.27 - 14 A - FDmeshTM II Power MOSFET D2PAK, I2PAK, TO-220, TO-220FP, TO-247
Features
Type STB15NM60ND STF15NM60ND STI15NM60ND STP15NM60ND STW15NM60ND VDSS (@Tjmax) RDS(on) max ID 14 A 14 A 14 A(1) 14 A 14 A
3 1
3 12
650 V
0.299
D2PAK
2 1 3
IPAK
TO-247
3 1 2
1 2 3
1. Limited only by maximum temperature allowed
The worldwide best RDS(on)* area amongst the fast recovery diode devices 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Extremely high dv/dt and avalanche capabilities
TO-220
TO-220FP
Figure 1.
Internal schematic diagram
Application
Switching applications
Description
The FDmeshTM II series belongs to the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout and associates all advantages of reduced onresistance and fast switching with an intrinsic fastrecovery body diode.Strongly recommended for bridge topologies, in ZVS phase-shift converters. Table 1. Device summary
Marking 15NM60ND 15NM60ND 15NM60ND 15NM60ND 15NM60ND Rev 2 Package D2PAK TO-220FP I2PAK TO-220 TO-247 Packaging Tape and reel Tube Tube Tube Tube 1/19
www.st.com 19
Order codes STB15NM60ND STF15NM60ND STI15NM60ND STP15NM60ND STW15NM60ND April 2008
Contents
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Contents
1 2 3 4 5 6 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test circuit ................................................ 7
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Electrical ratings
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Value Parameter DPAK/IPAK TO-220FP TO-220/IPAK 600 25 14 9 56 125 40 -2500 -55 to 150 150 14 (1) 9(1) 56(1) 30 Unit
VDS VGS ID ID IDM (2) PTOT dv/dt (3) VISO Tstg Tj
Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) Storage temperature Operating junction temperature
V V A A A W V/ns V C C
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 14 A, di/dt 400 A/s, VDD = 80% V(BR)DSS
Table 3.
Symbol Rthj-case Rthj-amb Rthj-pcb
Thermal data
Parameter Thermal resistance junction-case max Thermal resistance junction-amb max Thermal resistance junction-pcb max Maximum lead temperature for soldering purposes -62.5 -TO-220 IPAK 1 50 --30 TO-247 DPAK TO-220FP 4.2 62.5 -Unit C/W C/W C/W
Tl
300
C
3/19
Electrical ratings
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Table 4.
Symbol IAS EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj = 25 C, ID = IAS, VDD = 50 V) Max value 6 300 Unit A mJ
4/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Electrical characteristics
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 5.
Symbol V(BR)DSS dv/dt(1)
On/off states
Parameter Drain-source breakdown voltage Drain-source voltage slope Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS= 0 VDD = 480 V,ID = 14 A, VGS = 10 V VDS = Max rating, VDS = Max rating,@125 C VGS = 20 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 7 A 3 4 0.27 Min. 600 30 1 100 100 5 0.299 Typ. Max. Unit V V/ns A A nA V
IDSS IGSS VGS(th) RDS(on)
1. Value measured at turn off under inductive load
Table 6.
Symbol gfs(1) Ciss Coss Crss Coss eq.(2)
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Test conditions VDS =15 V, ID= 7 A VDS = 50 V, f =1 MHz, VGS = 0 Min. Typ. 10 1250 65 5 180 Max. Unit S pF pF pF pF
VGS = 0, VDS = 0V to 480 V f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain VDD = 480 V, ID = 14 A VGS = 10 V (see Figure 19)
Rg
4
nC nC nC
Qg Qgs Qgd
1.
Total gate charge Gate-source charge Gate-drain charge
40 8 22
Pulsed: pulse duration = 300 s, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS
5/19
Electrical characteristics
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Table 7.
Symbol td(on) tr td(off) tf
Switching times
Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 7 A, RG = 4.7 , VGS = 10 V (see Figure 18) Min Typ 17 20 47 28 Max Unit ns ns ns ns
Table 8.
Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM trr Qrr IRRM
2.
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 14 A, VGS=0 ISD =14 A, di/dt =100 A/s, VDD = 100 V (see Figure 20) VDD = 100 V di/dt =100 A/s, ISD = 14 A Tj = 150 C (see Figure 20) 148 910 12 190 1280 13 Test conditions Min Typ Max 14 56 1.3 Unit A A V ns nC A ns nC A
1. Pulse width limited by safe operating area Pulsed: pulse duration = 300 s, duty cycle 1.5%
6/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Electrical characteristics
2.1
Figure 2.
Electrical characteristics (curves)
Safe operating area for TO-220 / DPAK / IPAK Figure 3. Thermal impedance for TO-220 / DPAK / IPAK
Figure 4.
Safe operating area for TO-220FP
Figure 5.
Thermal impedance for TO-220FP
Figure 6.
Safe operating area for TO-247
Figure 7.
Thermal impedance for TO-247
7/19
Electrical characteristics Figure 8.
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Figure 9. Transfer characteristics
Output characteristics
Figure 10. Transconductance
Figure 11. Static drain-source on resistance
Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations
C(pF)
HV42710
1000 f= 1 MHz VGS = 0 GS
100
10
1 0.1
1
10
100
VDS(V)
8/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Figure 14. Normalized gate threshold voltage vs temperature
Electrical characteristics
Figure 15. Normalized on resistance vs temperature
Figure 16. Source-drain diode forward characteristics
Figure 17. Normalized BVDSS vs temperature
9/19
Test circuit
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
3
Test circuit
Figure 19. Gate charge test circuit
Figure 18. Switching times test circuit for resistive load
Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
10/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
11/19
Package mechanical data
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
12/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Package mechanical data
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
G
13/19
Package mechanical data
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
TO-262 (I2PAK) MECHANICAL DATA
mm. DIM. MIN. A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 TYP MAX. 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 MIN. 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 TYP. MAX. 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 inch
14/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Package mechanical data
TO-247 Mechanical data
mm. Min. 4.85 2.20 1.0 2.0 3.0 0.40 19.85 15.45 5.45 14.20 3.70 18.50 3.55 4.50 5.50 3.65 5.50 14.80 4.30 Typ Max. 5.15 2.60 1.40 2.40 3.40 0.80 20.15 15.75
Dim. A A1 b b1 b2 c D E e L L1 L2 oP oR S
15/19
Package mechanical data
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
DPAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
16/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND Packaging mechanical data
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
17/19
Revision history
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
6
Revision history
Table 9.
Date 06-Mar-2008 24-Apr-2008
Document revision history
Revision 1 2 First release VGS value on Table 2 changed. Changes
18/19
STP15NM60ND - STF/I15NM60ND - STB15NM60ND - STW15NM60ND
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
19/19

▲Up To Search▲

Price & Availability of STF15NM60ND

	To Download STF15NM60ND Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .